Archive for the ‘Transistors’ Category

2N3904 transistor from class project power supply

Monday, April 19th, 2010

2n3904 transitor from class project

A nice picture of a 2n3904 transistor used in a class project power supply that was destroyed along with other components not shown after a probable short.  Credit:  Lucas T.

C945 transistor explodes in differential amp

Monday, January 18th, 2010

Transistor in amplifier explodes

Transistor casing piece

An unfortunate accident while probing one of the transistors in part of a differential amp circuit led to a related transistor exploding.  Credit:  edman007.

MJE 13001 explodes in a GMT-TR20 USB Charger

Monday, January 18th, 2010
MJE13001 in GMT-TR20 explodes

MJE13001 in GMT-TR20 explodes

This transistor comes from a GMT-TR20 USB phone charger which was distributed with the L7, L9 and other phones.  After the explosion a trace to the transistor was destroyed and the PCB was blackened.  Wire was run to replace the damaged traces and after the transistor was replaced the charger worked again.  Credit:  http://gushh.net/blog

Xbox power supply failure damages pcb

Friday, November 27th, 2009

xbox power supply fries PCB

This appears to be an Xbox revision 1.1 where the power supply failure caused significant damage to the PCB.  The vented capacitor in the picture is a 680uF/16V capacitor which shorted, damaged the FET, and led to the failure of the power plane.  Ideally the power supply should sense failure conditions and shut down.  The FET was a Philips 21N06.  Credits: Ahmad Tabbouch of http://ultrakeet.com.au.

Dynapower DP-40205 with exploded FET

Wednesday, November 25th, 2009
Dynapower DP-40205 top

DP-40205 top

Dynapower DP-40205 with exploded FET

Exploded FET

These pictures come from a Dynapower USA DP-40205 400W power supply.  It appears the standby regulation failed and took out the FET pictured above and also the capacitor and resistor near the top of the fan.  The exploded piece of the FET was rattling around the power supply when it was opened and the part that remained on the board was loose.  It’s suspected the capacitor damage was from overvoltage when the regulator failed for unknown reasons.  Credit: http://blog.kevtris.org/

Pages: 1 2 Next